KZ1 / KZ2 / DD2 kart

 
 

KZ1 / KZ2 kart

Chassis are made of seamless special Cr Mo steel tubes of diameters 30 mm (1.18 in) and 32 mm (1.26 in). Tube cutting and welding are performed using laser technology machines and tube bending with state of the art CNC machines.
Components are cut from best aluminium solid pieces and then titanium anodized, the first being done with state of the art CNC fully automatized machines and held to tight tolerances. All these operations are performed within PAROLIN RACING KART’s facilities.


Wheelbase ranges from 1045 to 1050 mm (see below). Stub axles are cut from a single steel piece. Ackerman geometry, camber and caster are adjustable. Pedals are made of aluminium and present an ultra-low friction attachment system which provides enhanced sensibility.


Brakes are hydraulic self adjusting CIK FIA homologated AP RACE, in front and rear.
Rear brake rotor is 194 x 18 mm or 199,5 x 12 mm in diameter, front brake rotors are 150 x 12 mm or 152 x 10 mm in diameter, all made of Cast Iron and ventilated. Brakes, as all components, are produced within our facilities. It presents front and rear removable stabilizer bars.


Rear axle is supported by three bearings with special cassettes and is 50 mm (1.97 in) in diameter. Optional 40 mm (1.57 in) is available.
The seat is manufactured in fiberglass and engineered using the latest ergonomic techniques. It also presents a controlled torsional stiffness.
The new aerodynamic streamlined bodyworks EUROSTAR WINGS or FLY are performed within Parolin Racing Kart's facilities.
Wheels are 210/130, made of magnesium, anodized, heat treated and present a triple bead retention system.
It presents right-left extra seat supports.
The anatomic steering wheel is a MOTORSPORT 322 mm (12.68 in) aluminum made.
Chassis are powder coated in Parolin red color and CIK FIA homologated.

 
Kz01 Kz02 Kz03   Kz04
           
Invader leMans Montecarlo   Monza
 
  Le Mans Monza Invader Montecarlo
Motorsport Version Code 99KLM5M_P 99KMZ5M_P 99KIN5M_P 99KMC5M_P
Basic Version* Code 99KLM5_P 99KMZ5_P 99KIN5_P 99KMC5_P
Category KZ1 - KZ2 (ICC - SICC - ICE) KZ1 - KZ2 (ICC - SICC - ICE) KZ1 - KZ2 (ICC - SICC - ICE) KZ1 - KZ2 (ICC - SICC - ICE)
Ø Tubes and material Mix 30-32 X2 - 25 cr-mo4 Mix 30-32 X2 - 25 cr-mo4 32 X 2 - 25 cr-mo4 32 X 2 - 25 cr-mo4
Wheel base 1046 mm 1046 mm 1050 mm 1045 mm
Rear width 636 mm 636 mm 636 mm 648 mm
Front width 718 mm 718 mm 720 mm 722 mm
Length 1530 mm 1530 mm 1530 mm 1530 mm
Tank capacity 9 lit 9 lit 9 lit 9 lit
Braking system Hydraulic self adjusting Hydraulic self adjusting Hydraulic self adjusting Hydraulic self adjusting
Brake position standard standard standard standard
Front brake disk Ventilated 150 x 12 mm Ventilated 150 x 12 mm Ventilated 150 x 12 mm Ventilated 152 x 10mm
Rear brake disk Ventilated 194 x 18 mm Ventilated 194 x 18 mm Ventilated 194 x 18 mm Ventilated 199,5 x 12mm
Axle 50x2x1040 hollow 50x2x1040 hollow 50x2x1040 hollow 50x2x1040 hollow
Steering wheel 320 Motorsport 320 Motorsport 320 Motorsport 320 Motorsport
Bodyworks Eurostar Fly / Wings Eurostar Fly / Wings Eurostar Fly / Wings Eurostar Fly / Wings
Magnesium Wheels 130-210 mm 130-210 mm 130-210 mm 130-210 mm
HOMOLOGATION CIK-FIA 84/CH/14 83/CH/14 32/CH/11 212/CH/08

*The basic version comes with 320 black steering wheel, Eurostar brake system 214/FR/08, steel pedals, Eurostar Light bodyworks, alloy wheels.

pdf AVAILABLE OPTIONS





 
 

DD2 kart

Chassis are made of seamless special Cr Mo steel tubes of diameters 30 mm (1.18 in) and 32 mm (1.26 in). Tube cutting and welding are performed using laser technology machines and tube bending with state of the art CNC machines.
Components are cut from best aluminumsolid pieces and then titanium anodized, the first being done with state of the art CNC fully automatized machines and held to tight tolerances. All these operations are performed within PAROLIN RACING KART’s facilities.


Wheelbase ranges from 1045 to 1050 mm (see below). Stub axles are cut from a single steel piece. Ackerman geometry, camber and caster are adjustable. Pedals are made of aluminum and present an ultra-low friction attachment system which provides enhanced sensibility.


Brakes are hydraulic self adjusting CIK FIA homologated AP RACE, in front and rear.
Rear brake rotor is 199,5 mm in diameter, front brake rotors are 152 mm in diameter, all made of Cast Iron and ventilated. Brakes, as all components, are produced within our facilities. It presents front and rear removable stabilizer bars.


Rear axle is supported by one bearing with special cassette and is 40 mm (1.57 in) in diameter.

The seat is manufactured in fiberglass and engineered using the latest ergonomic techniques.

The new aerodynamic streamlined bodyworks EUROSTAR WINGS or FLY are performed within Parolin Racing Kart's facilities.
Wheels are 210/130, made of magnesium, anodized, heat treated and present a triple bead retention system.
It presents right-left extra seat supports.
The anatomic steering wheel is a MOTORSPORT 322 mm (12.68 in) aluminum made.
Chassis is powder coated in Parolin red color, it is built according to CIK FIA regulations for short circuits karts and approved by BRP-ROTAX.

 
DD21 DD22 DD23   DD24
           
Invader leMans Montecarlo   Monza
 
  Le Mans Monza Invader Montecarlo
Motorsport Version Code 99KLM5M_P/DD2 99KMZ5M_P/DD2 99KIN5M_P/DD2 99KMC5M_P/DD2
Basic Version* Code 99KLM5_P/DD2 99KMZ5_P/DD2 99KIN5_P/DD2 99KMC5_P/DD2
Category DD2 DD2 DD2 DD2
Ø Tubes and material Mix 30-32 x 2 - 25 cr-mo4 Mix 30-32 x 2 - 25 cr-mo4 32 X 2 - 25 cr-mo4 32 X 2 - 25 cr-mo4
Wheel base 1046 mm 1046 mm 1050 mm 1045 mm
Rear width 636 mm 636 mm 636 mm 648 mm
Front width 718 mm 718 mm 720 mm 722 mm
Length 1530 mm 1530 mm 1530 mm 1530 mm
Tank capacity 9 lit 9 lit 9 lit 9 lit
Braking system Hydraulic self adjusting Hydraulic self adjusting Hydraulic self adjusting Hydraulic self adjusting
Brake position standard standard standard standard
Front brake disk Ventilated 150 x 12 mm Ventilated 150 x 12 mm Ventilated 152 x 10mm Ventilated 152 x 10mm
Rear brake disk Ventilated 194 x 18 mm Ventilated 194 x 18 mm Ventilated 199,5 x 12mm Ventilated 199,5 x 12mm
Axle 40 x 2 x 1040 hollow 40 x 2 x 1040 hollow 40x2x1040 hollow 40x2x1040 hollow
Steering wheel 320 Motorsport 320 Motorsport 320 Motorsport 320 Motorsport
Bodyworks Eurostar Fly / Wings Eurostar Fly / Wings Eurostar Fly Eurostar Fly
Magnesium Wheels 130-210 mm 130-210 mm 130-210 mm 130-210 mm
HOMOLOGATION CIK-FIA 210/CH/08 - 84/CH/14 211/CH/08 - 83/CH/14 32/CH/11 212/CH/08

*The basic version comes with 320 black steering wheel, Eurostar brake system 214/FR/08, steel pedals, Eurostar Light bodyworks, alloy wheels.

pdf AVAILABLE OPTIONS

Translate

Fim Motors

Eurostar Kart Components

NewJersey

NewJersey

LAST NEWS

Wrooom 2012

  Anche quest'anno la Parolin Racing Kart ha collaborato con successo con il Centro Internazionale Guida Sicura di Andrea de Adamich in occasione dello spettacolare evento Wrooom 2012 a Madonna di Campiglio.

Read more

Formula1 and MotoGp Press Ski Meeting 2012 a Madonna di Campiglio

Formula1 and MotoGp Press Ski Meeting 2012 a Madonna di Campiglio

Parolin Racing Kart è presente a Wrooom 2012, Vi aspettiamo numerosi. Inizio gara venerdi 13 gennaio 2012 ore 16:45:  Potete seguirci anche in TV e in internet su Rai Sport 2:   ore 18:00 Wroom 2012 Mastershow       Programma Wrooom - Formula1 and MotoGp Press Ski Meeting 2012 a Madonna di Campiglio Dall' 8 al 15 Gennaio 2012 le scuderie dei team Ferrari F1 e Ducati MotoGp torneranno a Madonna di Campiglio per il tradizionale evento i...

Read more

Recognition of the FIA by the International Olympic Committee

Recognition of the FIA by the International Olympic Committee

11/01/2012By letter dated 9th December 2011, the President of the International Olympic Committee, Jacques Rogge, has announced that the Fédération Internationale de l’Automobile has been recognised by the IOC.The FIA strongly shares the Olympic sporting values as expressed by the IOC and aimed at developing a better understanding between communities worldwide. With this is mind the FIA affirms its commitments to respect the Olympic Charter, in particular:- to establish a...

Read more

09.01.2012 - The FIA and the CIK celebrate their 2011 Karting Champions

09.01.2012 - The FIA and the CIK celebrate their 2011 Karting Champions

The International Karting Commission of the FIA (CIK-FIA) started the year 2012 in dignified fashion by rewarding its Champion Drivers of the 2011 season on Saturday 7 January in Paris, at the Pavillon Gabriel, near the FIA headquarters and just off the famous Champs Élysées and Place de la Concorde. Opened in the presence of the FIA President, Jean Todt, the ceremony has honou...

Read more

Catalogue

Catalogue

top