KZ / Shifter / DD2

KZ1-13  
 
KZP4 KZP3 KZP2 KZP1
Invader leMans Montecarlo Monza
 

Chassis are made of seamless special CrMo steel tubes of diameters 30 mm (1.18 in) and 32 mm (1.26 in). High-precision tube cutting and welding are performed using laser technology machines, while tube bending is processed through state of the art CNC machines. 

Components are obtained from best aluminium and magnesium solid pieces and then Black anodized, the first being done with high-tech fully automatized machines and held to tight tolerances. All these operations are performed within Parolin Racing Kart’s facilities.

Wheelbase ranges from 1045 to 1050 mm (see chart below). Stub axles are cut from a single steel piece. Ackerman geometry, camber and caster are easily adjustable thanks to the innovative Eurostar eccentric system. Pedals are made of aluminium and present an ultra-low friction attachment system that provides enhanced sensibility.

Brakes are hydraulic self-adjusting CIK FIA homologated AP RACE, in front and rear. Rear brake rotor is 194 x 18 mm or 199.5 x 12 mm in diameter, front brake rotors are 150 x 12 mm or 152 x 10 mm in diameter, all made of Cast Iron and ventilated. Brakes, as all components, are produced within our facilities. It presents front and rear removable stabilizer bars.

Rear axle is supported by three bearings with special cassettes and is 50 mm (1.97 in) in diameter. Optional 40 mm (1.57 in) is available.

The seat is manufactured in fiberglass and engineered using the latest ergonomic techniques. It also presents a controlled torsional stiffness.

The new aerodynamic streamlined bodyworks EUROSTAR Agile or WINGS are performed within Parolin Racing Kart's facilities.

Wheels are 210/130, made of magnesium, anodized, heat treated and present a triple bead retention system.

It presents right-left extra seat supports.

The anatomic steering wheel is mod. Motorsport 322 mm (12.68 in) aluminum made.

Chassis are powder coated in Parolin red color and CIK FIA homologated.

   
  Le Mans Monza Invader Montecarlo
Motorsport Version Code 99KLM5M_P 99KMZ5M_P 99KIN5M_P 99KMC5M_P
Basic Version* Code 99KLM5_P 99KMZ5_P 99KIN5_P 99KMC5_P
Category KZ1 - KZ2 (ICC - SICC - ICE) KZ1 - KZ2 (ICC - SICC - ICE) KZ1 - KZ2 (ICC - SICC - ICE) KZ1 - KZ2 (ICC - SICC - ICE)
Ø Tubes and material Mix 30-32 X2 - 25 cr-mo4 Mix 30-32 X2 - 25 cr-mo4 32 X 2 - 25 cr-mo4 32 X 2 - 25 cr-mo4
Wheel base 1046 mm 1046 mm 1050 mm 1045 mm
Rear width 636 mm 636 mm 636 mm 648 mm
Front width 718 mm 718 mm 720 mm 722 mm
Length 1530 mm 1530 mm 1530 mm 1530 mm
Tank capacity 9 lit 9 lit 9 lit 9 lit
Braking system Hydraulic self adjusting Hydraulic self adjusting Hydraulic self adjusting Hydraulic self adjusting
Brake position standard standard standard standard
Front brake disk Ventilated 150 x 12 mm Ventilated 150 x 12 mm Ventilated 150 x 12 mm Ventilated 152 x 10mm
Rear brake disk Ventilated 194 x 18 mm Ventilated 194 x 18 mm Ventilated 194 x 18 mm Ventilated 199,5 x 12mm
Axle 50x2x1040 hollow 50x2x1040 hollow 50x2x1040 hollow 50x2x1040 hollow
Steering wheel 330 Motorsport 330 Motorsport 330 Motorsport 330 Motorsport
Bodyworks Eurostar Agile / Wings Eurostar Agile / Wings Eurostar Agile / Wings Eurostar Agile / Wings
Magnesium Wheels 130-210 mm 130-210 mm 130-210 mm 130-210 mm
HOMOLOGATION CIK-FIA 52/CH/20 83/CH/14 32/CH/11 212/CH/08

*The basic version comes with 320 black steering wheel, Eurostar brake system 214/FR/08, steel pedals, Eurostar Wings bodyworks, alloy wheels.

pdf FICHES





 
 
DD21 DD22 DD23 DD24
Invader leMans Montecarlo Monza
 

DD2 kart

Chassis are made of seamless special CrMo steel tubes of diameters 30 mm (1.18 in) and 32 mm (1.26 in). High-precision tube cutting and welding are performed using laser technology machines, while tube bending is processed through state of the art CNC machines. 

Components are obtained from best aluminium and magnesium solid pieces and then Black anodized, the first being done with high-tech fully automatized machines and held to tight tolerances. All these operations are performed within Parolin Racing Kart’s facilities.

Wheelbase ranges from 1045 to 1050 mm (see chart below). Stub axles are cut from a single steel piece. Ackerman geometry, camber and caster are easily adjustable thanks to the innovative Eurostar eccentric system. Pedals are made of aluminium and present an ultra-low friction attachment system that provides enhanced sensibility.

Brakes are hydraulic self-adjusting CIK FIA homologated AP RACE, in front and rear. Rear brake rotor is 194 x 18 mm or 199.5 x 12 mm in diameter, front brake rotors are 150 x 12 mm or 152 x 10 mm in diameter, all made of Cast Iron and ventilated. Brakes, as all components, are produced within our facilities. It presents front and rear removable stabilizer bars.

Rear axle is supported by one bearings with special cassettes and is 40 mm (1.97 in) in diameter.

The seat is manufactured in fiberglass and engineered using the latest ergonomic techniques. It also presents a controlled torsional stiffness.

The new aerodynamic streamlined bodyworks EUROSTAR Agile or WINGS are performed within Parolin Racing Kart's facilities.

Wheels are 210/130, made of magnesium, anodized, heat treated and present a triple bead retention system.

It presents right-left extra seat supports.

The anatomic steering wheel is mod. Motorsport 330 mm (12.68 in) aluminum made.

Chassis are powder coated in Parolin red color, Rotax homologation approved.

   
  Le Mans Monza Invader Montecarlo
Motorsport Version Code 99KLM5M_P/DD2 99KMZ5M_P/DD2 99KIN5M_P/DD2 99KMC5M_P/DD2
Basic Version* Code 99KLM5_P/DD2 99KMZ5_P/DD2 99KIN5_P/DD2 99KMC5_P/DD2
Category DD2 DD2 DD2 DD2
Ø Tubes and material Mix 30-32 x 2 - 25 cr-mo4 Mix 30-32 x 2 - 25 cr-mo4 32 X 2 - 25 cr-mo4 32 X 2 - 25 cr-mo4
Wheel base 1046 mm 1046 mm 1050 mm 1045 mm
Rear width 636 mm 636 mm 636 mm 648 mm
Front width 718 mm 718 mm 720 mm 722 mm
Length 1530 mm 1530 mm 1530 mm 1530 mm
Tank capacity 9 lit 9 lit 9 lit 9 lit
Braking system Hydraulic self adjusting Hydraulic self adjusting Hydraulic self adjusting Hydraulic self adjusting
Brake position standard standard standard standard
Front brake disk Ventilated 150 x 12 mm Ventilated 150 x 12 mm Ventilated 152 x 10mm Ventilated 152 x 10mm
Rear brake disk Ventilated 194 x 18 mm Ventilated 194 x 18 mm Ventilated 199,5 x 12mm Ventilated 199,5 x 12mm
Axle 40 x 2 x 1040 hollow 40 x 2 x 1040 hollow 40x2x1040 hollow 40x2x1040 hollow
Steering wheel 320 Motorsport 320 Motorsport 320 Motorsport 320 Motorsport
Bodyworks Eurostar Agile / Wings Eurostar Agile / Wings Eurostar Agile / Wings Eurostar Agile / Wings
Magnesium Wheels 130-210 mm 130-210 mm 130-210 mm 130-210 mm
HOMOLOGATION CIK-FIA 210/CH/08 - 52/CH/20 211/CH/08 - 83/CH/14 32/CH/11 212/CH/08

*The basic version comes with 320 black steering wheel, Eurostar brake system 214/FR/08, steel pedals, Eurostar Wings bodyworks, alloy wheels.

pdf FICHES INVADER

pdf FICHES LEMANS

pdf FICHES MONZA

Official Supplier

HomeCikFia

Official Promoter

Factory Tour

HomeVideo

Social

HomeFacebook HomeTwitter HomeYouTube HomeIstogram