The brand new XT40 is a cutting edge state of the art vehicle which represents an extreme heavy duty rental kart capability, being at the same time a kart breed to perform, as all PAROLIN RACING KART products.
Tube cutting and welding are performed using laser technology machines and tube bending with CNC fully automatic machines.
Chassis are made of seamless special Cr-Mo steel tubes of 40x2 mm in diameter.
By unscrewing accessible bolts, the axle and the rear brake can be removed.
This adds to the vehicle’s ease of maintenance and repair. Axle is 40x5x1040mm in diameter.
The Clutch Protection System avoids the simultaneous use of the gas and brake pedals increasing the clutch’s service life.
The use of all round polymer bumpers, especialy in indoor tracks, allows the vehicles to slide one against the other in the event of collisions.
Standard
Options
Chassis Code
99KIXT_P
Diameter tubes
40 X 2 mm Cr-Mo
Pitch
1060 & 1080 mm
Total width
1400 mm
Total length
1970 mm
Diameter axle
40 X 960 mm (std.)
Axle bearings
2 sb210/06
Brake system
Self-Adjusting
Rear brake disk
180 X 4 mm Steel (std.)
180 X 8 mm Steel (opt.)
Steering wheel
300 mm (std.)
320 mm (opt.)
Seat
M or L Fiberglass (std.)
Tillett covered (opt.)
Protections
Rear axle cover
Red, Blue, Black
Engine
Fiberglass Engine cover
for the following engines:
External exhaust pipe kit
complete with silencer
(located under the rear axle
cover) for the above listed
engines
Belt and pulley kit
(Specify n. of teeth)
Chain and Sprocket kit
( specify n. of teeth )
Steel chain sprocket
from 28 to 33 teeth, 428
Steel engine sprocket
from 12 to 15 teeth, 428
Eurostar chain (428 HR )
Gasoline pump kit
Protections
Roll bar
bodyworks ( standard feature )
Red, Black, Blue
Decals kit
Anti-slip surface floor tray
All-round special polymer
bumpers
Wheel
Wheel set 180 - 125 mm
reinforced and heat treated
aluminium with 17mm standard
or 20 mm opt. pin
Tires
Bridgestone / Via Rent
10x3.60-5 / 11x6.00-5
10x4.50-5 / 11x7.10-5
Weight
Weight box kit 5 - 10 -15 kg
Mini Indoor XT32
The brand new XT32 is a cutting edge state of the art vehicle which represents an extreme heavy duty rental kart capability, being at the same time a kart breed made to perform, as all PAROLIN RACING KART products.
Tube cutting and welding are performed using laser technology machines and tube bending with CNC fully automatic machines.
Chassis are made of seamless special Cr-Mo steel tubes of 32x2 mm in diameter.
By unscrewing accessible bolts, the axle and the rear brake can be removed.
This adds to the vehicle’s ease of maintenance and repair. Axle is 30x960mm or, as an option, 40x5x1000 mm in diameter.
The special rear engine position allows the customer to drive with ease and comfort.
The use of all round polymer bumpers, especialy in indoor tracks, allows the vehicles to slide one against the other in the event of collisions.
Standard
Options
Chassis Code
99KIX32_P
Diameter tubes
32 X 2 mm Cr-Mo
Pitch
1030 mm
Total width
1300 mm
Total length
1800 mm
Diameter axle
30 X 960 mm (std.)
40 x 5 x 1000 mm (opt.)
Brake system
Self-Adjusting
Rear brake disk
180 X 4 mm Steel (std.)
180 X 8 mm Steel (opt.)
Steering wheel
300 mm (std.)
320 mm (opt.)
Seat
M or L Fiberglass (std.)
Tillett covered (opt.)
Protections
Rear axle cover
Red, Blue, Black
Engine
Fiberglass Engine cover
for the following engines
Briggs&Stratton
EX21 Subaru
GX200 Honda
External exhaust pipe kit
complete with silencer
(located under the rear axle
cover) for the above listed
engines
Belt and pulley kit
(Specify n. of teeth)
Chain and Sprocket kit
( specify n. of teeth )
Steel chain sprocket
from 28 to 33 teeth, 428
Steel engine sprocket
from 12 to 15 teeth, 428
Eurostar chain (428 HR )
Gasoline pump kit
Protections
Roll bar
bodyworks (standard feature)
Red, Black, Blue
Decals kit
All-round special steel tube
bumpers
All-round special polymer
bumpers
Wheel
Wheel set 180 - 125 mm
reinforced and heat treated
aluminium with 17mm standard
or 20 mm opt. pin
Tires
Bridgestone / Via Rent
10x3.60-5 / 11x6.00-5
10x4.50-5 / 11x7.10-5
