KF1/KF2/KF3 kart

Chassis are made of seamless special Cr Mo steel tubes of diameters 30 mm (1.18 in) and 32 mm (1.26 in).

Tube cutting and welding are performed using laser technology machines and tube bending with state of the art CNC machines.

components are cut from the best billet aluminium and then titanium anodized, the first being done with state of the art CNC fully automated machines and held to tight tolerances. All of these operations are performed within PAROLIN RACING KART’s facilities.

Wheelbase ranges from 1045 to 1050 mm (see below). Stub axles are cut from a single steel piece. Ackerman geometry, camber and caster are adjustable.

Pedals are made of aluminum and utilize an ultra-low friction attachment system which provides enhanced sensitivity.

Brakes are hydraulic self adjusting CIK FIA homologated AP RACE. Rear brake rotor is 199,5 mm in diameter, front brake rotors are 152 mm in diameter, all made of Cast Iron and ventilated. Brakes, as all components, are produced within our facilities. It utilizes front and rear removable stabilizer bars.

The rear axle is supported by three bearings with special cassettes and is 50 mm (1.97 in) in diameter. Optional 40 mm (1.57 in) is available. The seat is manufactured in fiberglass and engineered using the latest ergonomic techniques. It also utilizes a controlled torsional stiffness.

Wheels are 210/130, made of magnesium, anodized, heat treated and present a triple bead retention system. It utilizes right-left extra seat supports.

The ergonomic steering wheel is a MOTORSPORT 320 mm (12.59 in) aluminum made.

Chassis is powder coated in Parolin red color. Floor tray is powder coated in gray.

Montecarlo Monza Invader Le Mans Motorsport Version Code 99KMC0M_P Basic Version* Code 99KMC0_P Category KF1 - KF2 - KF3 (ICAJ-ICA) Ø Tubes and material 32 X 2 - 25 cr-mo4 Wheel base 1045 mm Rear width 648 mm Front width 722 mm Length 1530 mm Tank capacity 9 lit Braking system Hydraulic self adjusting Brake position standard Rear brake disk Ventilated 199,5 x 12mm Axle 50x2x1040 hollow Steering wheel 320 Motorsport Bodyworks Eurostar Fly Magnesium Wheels 130-210 - 130-180 mm HOMOLOGATION CIK-FIA 212/CH/08 Motorsport Version Code 99KMZ0M_P Basic Version* Code 99KMZ0_P Category KF1 - KF2 - KF3 (ICAJ - ICA) Ø Tubes and material Mix 30-32 X2 - 25 cr-mo4 Wheel base 1046 mm Rear width 636 mm Front width 718 mm Length 1530 mm Tank capacity 9 lit Braking system Hydraulic self adjusting Brake position standard Rear brake disk Ventilated 199,5 x 12mm Axle 50x2x1040 hollow Steering wheel 320 Motorsport Bodyworks Eurostar Fly Magnesium Wheels 130-210 - 130-180 mm HOMOLOGATION CIK-FIA 211/CH/08 Motorsport Version Code 99KIN0M_P Basic Version* Code 99KIN0_P Category KF1 - KF2 - KF3 (ICAJ - ICA) Ø Tubes and material 32 X 2 - 25 cr-mo4 Wheel base 1050 mm Rear width 636 mm Front width 720 mm Length 1530 mm Tank capacity 9 lit Braking system Hydraulic self adjusting Brake position standard Rear brake disk Ventilated 199,5 x 12mm Axle 50x2x1040 hollow Steering wheel 320 Motorsport Bodyworks Eurostar Fly Magnesium Wheels 130-210 - 130-180 mm HOMOLOGATION CIK-FIA 32/CH/11 Motorsport Version Code 99KLM0M_P Basic Version* Code 99KLM0_P Category KF1 - KF2 - KF3 (ICAJ - ICA) Ø Tubes and material Mix 30-32 X2 - 25 cr-mo4 Wheel base 1046 mm Rear width 636 mm Front width 718 mm Length 1530 mm Tank capacity 9 lit Braking system Hydraulic self adjusting Brake position standard Rear brake disk Ventilated 199,5 x 12mm Axle 50x2x1040 hollow Steering wheel 320 Motorsport Bodyworks Eurostar Fly Magnesium Wheels 130-210 - 130-180 mm HOMOLOGATION CIK-FIA 210/CH/08